China Suppliers Factory AFZH-306 Tin Free Self Polishing Anti Fouling Paint - Eco-Friendly & Decorative Options Available
Product Characteristics
- ✅ Does not contain internationally banned toxic substances such as organotin (TBT).
- ✅ Has long-term effectiveness, with a validity period of more than 12 months.
- ✅ Adapts to ships of different speeds — the paint film surface is uniformly hydrolyzed by friction with water flow, continuously releasing anti-fouling active substances while forming a smooth surface to reduce navigation resistance.
- ✅ Low temperature construction is possible.
Recommended Use
🚢
Primarily designed for anti-fouling on the bottom of small fishing boats or cruise ships during closed fishing seasons.
Product Parameters
| Item | Data | |||
| Specific Gravity (Kg/L) | 1.7 | |||
| Color | Iron Red | |||
| Volume Solid % | 63 ± 2 | |||
| Dry Film Thickness (μm) | 100 | |||
| Theoretical Coating Rate (㎡/L) | 6.3 | |||
| Flash Point | 27°C [81°F] | |||
| Volatiles (g/L) | 321 | |||
| Gloss | Matte | |||
| Drying Time | 10℃ | 20℃ | 30℃ | |
| Dry To Touch | 60 min | 45 min | 30 min | |
| Dry To Hard | 12 hrs | 8 hrs | 7 hrs | |
| Coating Interval | 10℃ | 20℃ | 30℃ | |
| Min. | 12 hrs | 6 hrs | 4 hrs | |
| Max. | — | |||
| Shelf Life | 24 months at 25°C | |||
Application
🔧
Construction Method
Airless spray
Nozzle pressure: 14 MPa – 21 MPa
Nozzle hole diameter: 0.6 – 0.8 mm
Nozzle pressure: 14 MPa – 21 MPa
Nozzle hole diameter: 0.6 – 0.8 mm
📋
Surface Treatment & Construction Conditions
Dust, sand, loose material, pollutants and marine life must be removed prior to application.
Construction should always be carried out on the recommended primer. The primer surface should be dry and free of any contaminants.
To avoid condensation, apply on a clean, dry surface at a temperature at least 3°C [5°F] above the dew point.
The relative humidity during construction and drying film formation must be less than 85%.
Construction should always be carried out on the recommended primer. The primer surface should be dry and free of any contaminants.
To avoid condensation, apply on a clean, dry surface at a temperature at least 3°C [5°F] above the dew point.
The relative humidity during construction and drying film formation must be less than 85%.
Disclaimer
The information given on this technical data sheet is correct to the best of our knowledge. In consideration of the application conditions of the product are beyond our control, so no guarantee is involved herein, namely, we are responsible for the buyers only in terms of their selecting a product. All data must be clarified from our company because of the constantly improvement of our product and its manufacturing process.
Frequently Asked Questions (FAQ)
Q
Does this antifouling paint contain organotin (TBT) or other internationally banned substances?
No. This product is formulated without organotin (TBT) or any other internationally prohibited toxic substances, making it compliant with global environmental and maritime regulations.
Q
How long does the antifouling protection last?
The product provides long-term effectiveness with a validity period of more than 12 months under normal operating conditions, making it suitable for vessels during extended closed fishing seasons.
Q
What types of vessels is this antifouling paint recommended for?
This paint is primarily designed for the underwater hull of small fishing boats and cruise ships, particularly during closed fishing seasons when vessels remain stationary for extended periods.
Q
What are the surface preparation requirements before application?
The surface must be thoroughly cleaned to remove dust, sand, loose materials, pollutants, and any marine life. Application should always be performed over the recommended primer, which must be completely dry and free from contaminants.
Q
What environmental conditions are required during application?
The surface temperature must be at least 3°C (5°F) above the dew point to prevent condensation. Relative humidity during application and film drying must remain below 85%. The product supports low-temperature construction, making it versatile across different climates.
Q
What is the recommended application method and how should the product be stored?
The recommended application method is airless spray, using a nozzle pressure of 14–21 MPa and a nozzle hole diameter of 0.6–0.8 mm. The product should be stored at 25°C with a shelf life of up to 24 months when kept in original, sealed packaging.