Leave Your Message

AK30-49 Acrylic Topcoat

This product is a marine single-component acrylic topcoat formula, featuring excellent water resistance and weatherability. It is commonly used for painting outdoor sun-resistant parts above the waterline of ships. With its fast drying speed, this product can be used for quick repairs, allowing ships to set sail the next day after painting.

    Product Features

    High weather resistance: Acrylic topcoat boasts excellent UV resistance, effectively resisting the erosion caused by harmful rays in sunlight on the hull, preventing color fading and coating aging.
    Excellent light and color retention: It can maintain vibrant colors and high gloss for an extended period, contributing to the long-term aesthetic appearance of ships.
    Convenient application: This topcoat typically exhibits good fluidity and leveling properties, making it easy to apply. It can be coated using methods such as spraying and brushing.

    Recommendations

    Used in engineering machinery and equipment facilities

    Product Parameters

    Project Data
    Density (Kg/L) 1.2
    Color various colours
    Solid percentage by volume % 48±2
    Reference dry film thickness (μm) 30
    Theoretical coating rate (㎡/L) 16
    Flash point 38°С [100°F]
    Volatile matter (g/L) 450
    Gloss gloss
    Drying time 10℃ 20℃ 30℃
    Dry to touch 30mins 20mins 15mins
    Actual drying 5hrs 4.5hrs 4hrs
    Storage period 12 months 25°C

    Application

    Construction method:
    Airless spraying
    Nozzle pressure: 14 MPa -21 MPa
    Nozzle hole diameter: 0.6mm-0.8mm
    If brush or roller application is used, more coats will be required to achieve the specified dry film thickness. Spray data is for reference only and may be adjusted. Pressure applies to material temperature at 20°C [68°F].
    Surface treatment and construction conditions:
    Remove oil, grease and other contaminants with a suitable cleaning agent. 
    High-pressure water cleaning removes salt, detergents and other contaminants.
    Remove dust, sand and loose materials.
    To avoid condensation, please apply on a clean and dry surface with a temperature at least 3 ° C [5 ° F] above the dew point
    The relative humidity during construction and curing must be below 85%

    Disclaimer

    The information provided in this manual is the most comprehensive and correct information we have at present. Since the conditions of product use are beyond our control, the information here does not contain any guarantee, that is, we are only responsible to the buyer for the product selection. Due to the continuous development of our company's products and production processes, all information here is subject to our confirmation.

    Leave Your Message