China PFL-1005 Alcohol-Based Anti-Slip Paint - Durable Solutions from Top Suppliers & Factory
Product Features
-
🛡️Anti-slip Property This is its primary function. The dried paint film has a rough surface, which can effectively increase friction and prevent people from slipping when walking, especially in wet and slippery environments.
-
🔩Protective Properties It possesses excellent properties common to alkyd paints, such as strong adhesion, good weather resistance, water and sunlight resistance, and can provide good anti-corrosion and anti-rust protection for substrates.
-
🎨Decorative Offers a variety of color options, such as gray, grass green, and amaranth, to meet the aesthetic needs of different scenarios.
-
🖌️Convenient Construction It can be applied by brushing, spraying, or other methods, and has relatively low requirements for the construction environment. It can be used after opening the barrel and stirring evenly.
-
💰Cost-effectiveness As a traditional industrial coating, alkyd anti-slip paint boasts mature technology and a relatively affordable price, offering high cost-effectiveness.
Recommended Use
⚓
It is used as an anti-slip finish for economical vessels such as fishing boats or pleasure crafts.
Product Parameters
| Project | Data | |||
| Density (Kg/L) | 2.57 | |||
| Color | Gray Green | |||
| Solid percentage by volume % | 59±2 | |||
| Reference dry film thickness (μm) | 60 | |||
| Theoretical coating rate (㎡/L) | 10 | |||
| Flash point | 25°С [77°F] | |||
| Volatile matter (g/L) | 330 | |||
| Glossy | Matt | |||
| Drying time | 10℃ | 20℃ | 30℃ | |
| Dry to touch | 20 mins | 10 mins | 5 mins | |
| Actual drying | 24 hrs | 6 hrs | 5 hrs | |
| Painting Interval | 10℃ | 20℃ | 30℃ | |
| min | 24 hrs | 3 hrs | 2 hrs | |
| max | 9 days | 6 days | 3 days | |
| Potlife | 10℃ | 20℃ | 30℃ | |
| 16 hrs | 8 hrs | 6 hrs | ||
| Mixing ratio | Primer : Hardener (6 : 1 volume ratio) | |||
| Storage period | 24 months @ 25°C | |||
Application
🔧 Construction Method
- Airless spraying
- Nozzle pressure: 14 MPa – 21 MPa
- Nozzle hole diameter: 0.6 mm – 0.8 mm
🌡️ Surface Treatment & Conditions
- To avoid condensation, work on a clean, dry surface at least 3°C [5°F] above the dew point.
- The primer surface should be dry and free from any contaminants (oil, grease, salt, water, dust, etc.) and overcoated within the specified overcoating intervals.
- Relative humidity must be less than 85% during application and curing.
Disclaimer
⚠️
The information provided in this manual is the most comprehensive and correct information available to us at this time. In view of the fact that the conditions of use of the products are beyond our control, the information contained herein is without warranty, i.e., we are responsible to the buyer for the selection of the products only. Due to the continuous development of our products and production processes, all information herein is subject to confirmation by us.
Frequently Asked Questions
Q
What surfaces is alkyd anti-slip paint most suitable for?
Alkyd anti-slip paint is most suitable for steel decks and walkways on economical vessels such as fishing boats and pleasure crafts, where traction and corrosion resistance are required in wet environments.
Q
What is the recommended application method for this anti-slip paint?
The recommended method is airless spraying with a nozzle pressure between 14 MPa and 21 MPa and a nozzle hole diameter of 0.6 mm to 0.8 mm. It can also be applied by brushing for smaller areas.
Q
What environmental conditions are required during application?
Application should be carried out on a clean, dry surface at a temperature at least 3°C [5°F] above the dew point to prevent condensation. Relative humidity must remain below 85% throughout the application and curing process.
Q
How long does the paint take to dry and what is the recoating interval?
At 20°C, the paint is dry to touch within 10 minutes and fully dry within 6 hours. The minimum recoating interval at 20°C is 3 hours, and the maximum is 6 days. Drying times vary with temperature — lower temperatures require longer drying periods.
Q
What is the mixing ratio for this product?
The product should be mixed at a volume ratio of 6 parts primer to 1 part hardener. Once mixed, the potlife at 20°C is 8 hours, so the mixed material should be used within that timeframe.
Q
How long can the product be stored, and what are the storage conditions?
The product has a storage period of 24 months when stored at 25°C in its original, unopened container. It should be kept away from direct sunlight and extreme temperatures to maintain product quality.