High-Quality Polyurethane Anti-Slip Paint from China Suppliers | Durable Factory Coatings for Safe Surfaces
Product Features
-
High Anti-Slip Performance — Controllable surface roughness with a dry friction coefficient ≥0.6 and wet friction coefficient ≥0.4, effectively preventing slipping of personnel or vehicles.
-
Excellent Durability — The polyurethane system endows the coating with high wear resistance, impact resistance, and good flexibility, making it suitable for high-traffic or heavy-load areas.
-
Strong Weather Resistance (Aliphatic Type) — Using aliphatic isocyanate (e.g. HDI), it can be used outdoors for extended periods without yellowing or losing gloss, suitable for decks and exposed platforms.
-
Chemical Corrosion Resistance — Resistant to oil, water, weak acids and alkalis, and salt spray; suitable for harsh environments such as marine and industrial settings.
-
Strong Adhesion — Excellent adhesion to steel, concrete, old coatings, and other substrates.
-
Customizable Texture & Color — Aggregate size (coarse/medium/fine) and color (gray, green, red, yellow, etc.) can be adjusted according to needs, balancing safety and aesthetics.
Recommended Use
🏗️
Used as anti-slip finish for facilities with high decorative requirements, such as bridges, ships, aprons, offshore platforms, decks, and stairs.
Product Parameters
| Project | Data | |||
|---|---|---|---|---|
| Density (Kg/L) | 1.5 | |||
| Color | Various colours | |||
| Solid percentage by volume % | 87 ± 2 | |||
| Reference dry film thickness (μm) | 100 | |||
| Theoretical coating rate (㎡/L) | 8.7 | |||
| Flash point | 30°C [86°F] | |||
| Volatile matter (g/L) | 120 | |||
| Glossy | Bright | |||
| Drying Time | 10℃ | 20℃ | 30℃ | |
| Dry to touch | 2.5 hrs | 1.5 hrs | 1 hr | |
| Actual drying | 12 hrs | 9 hrs | 8 hrs | |
| Painting Interval | 10℃ | 20℃ | 30℃ | |
| Min | 24 hrs | 10 hrs | 8 hrs | |
| Pot Life | 10℃ | 20℃ | 30℃ | |
| 60 mins | 50 mins | 40 mins | ||
| Mixing Ratio | Primer : Hardener (2.5 : 1 volume ratio) | |||
| Storage Period | 24 months at 25°C | |||
Application
Construction Method
Airless Spraying
Nozzle pressure: 14 MPa – 21 MPa
Nozzle hole diameter: 0.6 mm – 0.8 mm
Nozzle pressure: 14 MPa – 21 MPa
Nozzle hole diameter: 0.6 mm – 0.8 mm
Surface Treatment & Conditions
Work on a clean, dry surface at least 3°C [5°F] above the dew point to avoid condensation.
The primer surface must be dry and free from contaminants (oil, grease, salt, water, dust, etc.) and overcoated within specified intervals.
Relative humidity must be less than 85% during application and curing.
The primer surface must be dry and free from contaminants (oil, grease, salt, water, dust, etc.) and overcoated within specified intervals.
Relative humidity must be less than 85% during application and curing.
Disclaimer
⚠️
The information provided in this manual is the most comprehensive and correct information available to us at this time. In view of the fact that the conditions of use of the products are beyond our control, the information contained herein is without warranty, i.e., we are responsible to the buyer for the selection of the products only. Due to the continuous development of our products and production processes, all information herein is subject to confirmation by us.
Frequently Asked Questions (FAQ)
Q
What friction coefficient does this anti-slip polyurethane coating provide?
A
This coating offers a dry friction coefficient of ≥0.6 and a wet friction coefficient of ≥0.4, providing reliable slip resistance for both pedestrian and vehicle traffic under wet or dry conditions.
Q
Can this coating be used in outdoor or marine environments?
A
Yes. The aliphatic polyurethane formulation (using HDI isocyanate) resists yellowing, gloss loss, salt spray, and chemical corrosion, making it fully suitable for outdoor and marine environments such as offshore platforms, decks, and bridges.
Q
What is the mixing ratio and pot life of this product?
A
The mixing ratio is Primer : Hardener at 2.5 : 1 by volume. The pot life ranges from 40 minutes at 30°C to 60 minutes at 10°C, so mixed material should be applied promptly within this window.
Q
What surface preparation is required before application?
A
The substrate must be clean, dry, and free from all contaminants including oil, grease, salt, water, and dust. Application should be performed at least 3°C [5°F] above the dew point, with relative humidity below 85%.
Q
Are customized colors and textures available for this coating?
A
Yes. Both aggregate size (coarse, medium, or fine) and color (including gray, green, red, yellow, and more) can be customized to meet specific safety and aesthetic requirements for different project applications.
Q
What is the shelf life and recommended storage condition for this product?
A
The product has a storage period of 24 months when stored at 25°C. It is recommended to keep the product sealed and stored in a cool, dry environment away from direct sunlight and heat sources.