High-Performance Epoxy Putty (Regular) from China Suppliers - Factory Direct Anti-Corrosion & Filling Solution
Product Features
Filling performance: High filling capacity and anti-sagging under thick coating.
Adhesion & Strength: Excellent adhesion performance as well as mechanical & physical properties.
Chemical Resistance: Chemical properties featuring anti-corrosion and impermeability.
Compatibility: Properties of wide matching compatibility.
Eco-Friendly & Cost: Optimized cost and environmental protection properties.
Recommended Use
Concrete Repair: For concrete civil engineering repair works, such as pits and honeycombing on factory concrete floors, expansion joints, drainage ditches, cable trenches, underground non-potable water storage tanks, equipment foundations, and inner walls of septic tanks and wastewater tanks for leveling, leak sealing and slope forming.
Steel Structure Support: Supporting repair material for anti-corrosion treatment of steel structures.
Equipment Leveling: Used for leveling welds, filling rust pits and repairing edge defects on external surfaces of carbon steel storage tanks, pipelines, steel platforms, supports and sluice gates; it can be used as an intermediate leveling coat matched with epoxy primer, micaceous iron oxide intermediate coat and polyurethane topcoat.
Substrate Bonding: Bonding and repair for stone and metal substrates, including crack repair on basement walls, reattachment of fallen tiles, joint filling for acid-resistant bricks (wastewater tanks, acid-base neutralization tanks), repair of damaged stone surfaces, as well as leveling and reinforcement of equipment bases.
Mild Corrosion Areas: Mild industrial corrosion areas, such as small chemical wastewater tanks, flushing drainage trenches, drainage ditches in metallurgical workshops, factory rainwater collection tanks, and non-potable water storage facilities at docks.
Product Parameters
| Project | Data |
|---|---|
| Density (Kg/L) | 1.3 |
| Color | Grey |
| Solid percentage by volume (%) | 98±2 |
| Reference dry film thickness (μm) | 500 |
| Theoretical coating rate (㎡/L) | 2 |
| Flash point | 143°С [289°F] |
| Volatile matter (g/L) | 17 |
| Gloss | Matte |
| Drying time (25℃) | Dry to touch: 4hrs / Actual drying: 24hrs |
| Potlife (25℃) | 0.5hr |
| Mixing ratio | Base: hardener (4:1 by weight) |
| Storage period | 24 months (at 25°C) |
Application
Construction Method
- Suitable for trowel application.
Surface Treatment & Construction Conditions
- Remove oil, grease and other contaminants with a suitable cleaning agent.
- Remove dust, sand and loose materials.
Disclaimer: The information provided in this manual is the most comprehensive and correct information we have at present. Since the conditions of product use are beyond our control, the information here does not contain any guarantee, that is, we are only responsible to the buyer for the product selection. Due to the continuous development of our company's products and production processes, all information here is subject to our confirmation.
Frequently Asked Questions (FAQ)
1. What are the key features of this product?
This product features high filling capacity, anti-sagging properties, excellent adhesion, high mechanical and physical strength, anti-corrosion, impermeability, wide compatibility, and eco-friendly cost efficiency.
2. In which scenarios is this product recommended for concrete repair?
It is recommended for concrete civil engineering repairs including pits and honeycombing on factory concrete floors, expansion joints, drainage ditches, cable trenches, underground non-potable water storage tanks, equipment foundations, and inner walls of septic/wastewater tanks.
3. What is the mixing ratio and pot life of the product?
The mixing ratio is Base to Hardener (4:1 by weight). The pot life of the mixed material is 0.5 hours at a temperature of 25°C.
4. How long does the product take to dry at 25°C?
At 25°C, the product is dry to touch in approximately 4 hours, and achieves actual drying in 24 hours.
5. What is the recommended application method and surface preparation?
The product is suitable for trowel application. Before applying, ensure you remove all oil, grease, dust, sand, and loose materials from the substrate surface.